1.36.30 released
Re: 1.36.30 released
OK, finally I wrote Menue image to usb stick, and boot from USB. I tried various bootloaders and USB keys. Now Unetbotin do the job... Usb app says - usb 2.0 - fail (04); usb 1.x - fail (0.2uhci). In addition I want say my CPU is intel...
Re: 1.36.30 released
For usb2.0/ehci, it seems that BIOS is stll using the controller, so did you enable usb_legacy_disable at configuration? Another option is to disable usb legacy support in BIOS, but you might need ps2 keyboard to enable it back on. For usb1.x, it can not find the controller, so does the system->pciscan application find the uhci controller ?
Re: 1.36.30 released
When I boot with usb_legacy_disable enabled Menuet not see keyboard (and mouse). When we talk about disbaling usb legacy support in BIOS - I dont see apropiate option in setup BIOS. Perhaps my BIOS dont support such posibility... For usb 1.x - PCIscan raport only two ehci controllers.
Re: 1.36.30 released
Ville, from our short conversation I get signal to make a bootable usb key with MeOS and tips to emulate mouse via keyboard. With usb mass storage - despite our effort - no succes. Anyway thanks.
Greetings
Greetings
Re: 1.36.30 released
If motherboard has usb 3.0 (xhci) support, then it doesn't necessarily have usb 1.x controllers. All usb traffic can be handled with xhci.
Re: 1.36.30 released
Does MeOS have xhci support ? Maybye I should buy pci usb 3.0 extension card. Will it work? I think about pci eide extension card too. So I could plug one of my ide hdds. But is for me mystery if it will work in MeOS with one of ide canal ( for example primary master).
Re: 1.36.30 released
Menuet does not have a usb 3.0 (xhci) support, just usb2 (ehci) and usb1 (ohci and uhci).
Who is online
Users browsing this forum: No registered users and 139 guests